« Keyboards help MRSA spread in Hospitals
Removing Damaged Screws from a Raised Access Floor »

Guide to Surface Mounted Koldloks

This is Part 2 of our guide to the Koldok range of Products

Part 1 can be found here

The KoldLok Surface Mount (Model 2020) is for existing holes with cables already in place.

It splits apart to encircle the cables and then snaps together as one piece. The unit is then adhered to the top of the tile with the included adhesive mounting kit.

The KoldLok Surface Mount offers all the features of the Integral (with the exception of the NFPA requirement), but with the added benefit of easily sealing holes without having to disconnect existing cabling.

Since it is mounted on top of the tile, it seals any size or configuration of opening in the tile up to10″ x 7″ in size. The KoldLok Surface Mount L (Model 2030) and XL, (Model 2040) include metal plates for sealing larger openings.

The KoldLok Surface L seals openings up to 10″ x 10″ and the XL seals openings up to 10″ x 13″.

Koldlok Split Surface Mount - Raised Floor Grommet - Model 2020

This entry was posted on Sunday, May 6th, 2007 at 7:11 am and is filed under Data Centre Energy Reduction, Green Data Centre Design, Cable Grommets, Bypass Airflow, Koldok, Uptime Institute, Raised Access Floor, Access Floor. You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.

One Response to “Guide to Surface Mounted Koldloks”

  1. Data Clean - Ireland and UK Says:
    January 31st, 2008 at 8:40 pm

    […] He showed how Koldlok Brush Grommets, reduce bypass airflow (information on Koldlok Guide part 1 and Koldloks Guide part 2) and then explained how his range of Water Cooled Cabinets can help reduce the heat in your data centre. for those of you who could not make it to the BICSI conference held in Citywest, Dublin, Ireland. The full presentation can be downloaded here. […]