Guide to Koldloks - Part 1

The KoldLok Integral (Model 1010) is for new cable cut-outs and is designed to seal openings before any equipment has been installed on the raised-floor tile.

The KoldLok Integral sits flush with the floor into an opening approximately 9″x6″ or 235mm x 172mm .

The benefits and features of the Integral include a penetrable seal that allows re-cabling with automatic re-sealing, static dissipative properties, and compliance with NFPA requirements to trim cut metal edges of raised-floor tiles. It also assists gas fire suppression systems.

KoldLok also offers the Split Integral (Model 3030) for existing cabling in raised-floor tiles where the rack clearance is too low to accommodate a Surface Mount unit.
Special Features of the Integral Units

• The Split Integral Grommets allow tiles to be moved without capturing cable
• The Grommets integrate with the raised-floor static dissipation system
• 32 square inch usable cabling area accommodates a variety of cabling requirements, including 100 amp power connectors
• The Grommets satisfy NFPA 75 Section 5-4.4 requirement by self-dressing the raw metal edges of raised-floor tile cable cutouts
• The Grommets contain no loose or partially fastened parts, which can become separated or fall through the raised floor.
• Compliant with the directive that restricts the use of certain hazardous substances in electrical and electronic equipment (RoHS)

Koldlok Integral (Model 1010) Raised Floor Grommet - Drawing

Raised Floor Grommet - Technical Package.zip

Koldlok Split Integral (Model 3030) Raised Floor Grommet - Technical Package.zip

Koldlok Split Integral Raised Floor Grommet - Drawing

This entry was posted on Saturday, May 5th, 2007 at 9:31 am and is filed under Data Centre Energy Reduction, Green Data Centre Design, Cable Grommets, Koldok, Uptime Institute. You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.